Mailer Contrib
Allows users to "subscribe" to regularly scheduled emails containing either:
- A report on changes to all topics that have changed within a particular Foswiki web.
- A report on changes to a specific topic or set of topics the user can define flexibly.
- The entire content of a specific topic or set of topics. This is referred to as "news mode."
- The companion plugin (Foswiki:Extensions.SubscribePlugin) lets you trivially add a "Subscribe to changes" button to topics
How it works
MailerContrib generates and sends out emails based on analysis of
- users' subscriptions listed in the WebNotify topic in each web, and
- changes within the respective webs.
The mailer collates the changes so that each subscriber only receives one email notification for all changes in all webs in the wiki. Furthermore, users can elect to receive just summaries of changes, or the entire content of topics that have changed.
Notifications are only sent for changes that are not considered "minor". This is controlled by several factors:
- Changes to the same topic by the same user, when made within the configure setting
$Foswiki::cfg{ReplaceIfEditedAgainWithin} (default 3600 seconds / 1 hour), will be recorded as minor.
- Changes with the "force new revision" flag set are never logged as minor.
- Old releases of Foswiki allowed users to select a "Don't notify" checkbox during save. This feature was removed from Foswiki 2.x.
If the mailnotify process runs in the interm between a recorded change, and a subsequent minor change, then the 2nd minor change will not trigger a new notification.
How notifications are requested
Each web can optionally contain a topic called WebNotify.
Users subscribe to email notifications using their WikiName or an alternative email address, and can specify the webs/topics they wish to track. Whole groups of users can also be subscribed for notification.
The general format of a subscription is:
three spaces * subscriber [ : topics ]
Where subscriber can be a WikiName, an email address, or a group name. If subscriber contains any characters that are not legal in an email address, then it must be enclosed in 'single' or "double" quotes. 
Note: The guest user WikiGuest does not have an email address mapped to it, and will never receive email regardless of the configuration of that user.
topics is an optional space-separated list of topics:
- ... without a Web. prefix
- ...that exist in this web.
Users may further customize the specific content they will receive using the following controls:
- Using wild-card character in topic names - You can use
* in a topic name, where it is treated as a wildcard character. A * will match zero or more other characters - so, for example, Fred* will match all topic names starting with Fred, *Fred will match all topic names ending with Fred, and * will match all topic names.
- Unsubscribing to specific topics - Each topic may optionally be preceded by a '+' or '-' sign. The '+' sign means "subscribe to this topic". The '-' sign means "unsubscribe" or "don't send notifications regarding this particular topic". This allows users to elect to filter out certain topics. Topic filters ('-') take precedence over topic includes ('+') i.e. if you unsubscribe from a topic it will cancel out any subscriptions to that topic.
- Including child-topics in subscription - Each topic may optionally be followed by an integer in parentheses, indicating the depth of the tree of children below that topic. Changes in all these children will be detected and reported along with changes to the topic itself. Note This uses the Foswiki "Topic parent" feature.
- Subscribing to entire topic ("news mode") - Each topic may optionally be immediately followed by an exclamation mark ! and/or a question mark ? with no intervening spaces, indicating that the topic (and children if there is a tree depth specifier as well) should be mailed out as complete topics instead of change summaries. ! causes the full topic to be mailed every time even if there have been no changes, and ? will mail the full topic only if there have been changes. One can limit the content of the subscribed topic to send out by inserting
%STARTPUBLISH% and %STOPPUBLISH% markers within the topic.
Examples:
Subscribe Daisy to all changes to topics in this web.
* daisy.cutter@flowers.com
Subscribe Daisy to all changes to topics that start with Web.
* daisy.cutter@flowers.com : Web*
Subscribe Daisy to changes to topics starting with Petal, and their immediate children, WeedKillers and children to a depth of 3, and all topics that match start with Pretty and end with Flowers e.g. PrettyPinkFlowers.
* DaisyCutter: Petal* (1) WeedKillers (3) Pretty*Flowers
Subscribe StarTrekFan to changes to all topics that start with Star except those that end in Wars, sInTheirEyes or shipTroopers.
* StarTrekFan: Star* - *Wars - *sInTheirEyes - *shipTroopers
Subscribe Daisy to the full content of NewsLetter whenever it has changed.
* daisy@flowers.com: NewsLetter?
Subscribe buttercup to NewsLetter and its immediate children, even if it hasn't changed.
* buttercup@flowers.com: NewsLetter! (1)
Subscribe GardenGroup (which includes Petunia) to all changed topics under AllNewsLetters to a depth of 3. Then unsubscribe Petunia from the ManureNewsLetter, which she would normally get as a member of GardenGroup:
* GardenGroup: AllNewsLetters? (3)
* petunia@flowers.com: - ManureNewsLetter
Subscribe IT:admins (a non-Foswiki group defined by an alternate user mapping) to all changes to Web* topics.
* 'IT:admins' : Web*
A user may be listed many times in the WebNotify topic. Where a user has several lines in WebNotify that all match the same topic, they will only be notified about changes in that topic once (though they will still receive individual mails for news topics).
If a group is listed for notification, the group will be recursively expanded to the email addresses of all members.
Warning: Because an email address is not linked to a user name, there is no way for Foswiki to check access controls for subscribers identified by email addresses. A subscriber identified by an email address alone will only be sent change notifications if the topic they are subscribed to is readable by guest users. You can limit which email addresses can be used in WebNotify, or even block use of emails altogther, using the
{MailerContrib}{EmailFilterIn} setting in
configure.
Tip: List names in alphabetical order to make it easier to find the names.
Note that when using the "news mode" ! or ? specifiers the entire topic text is mailed out as HTML. The newsletter template is used to generate the content in this email, using whichever skin is selected in the topic being mailed.
In addition, the %STARTPUBLISH% and %STOPPUBLISH% markers used by Foswiki:Extensions.PublishPlugin to delimit the text to be published are respected in news mode.
Per-user preferences
When emails are generated, they take into account a subset of the user preferences of the user being mailed to (where these can be determined from user topics in the wiki), allowing things like (for example) user language preferences to be taken into account. The subset of preferences that is respected is defined configure setting {MailerContrib}{RespectUserPrefs} and defaults to LANGUAGE.
Foswiki/Contrib/MailerContrib code library
The second part of the module is a code library that provides the services for other applications to modify the subscription topics through a clean, well documented API. This allows (for example) plugin developers to add (for example) a "Register me for this newsletter" button to their pages. Developers should refer to the documentation for the WebNotify class as their starting point.
Installation Instructions
You do not need to install anything in the browser to use this extension. The following instructions are for the administrator who installs the extension on the server.
Open configure, and open the "Extensions" section. "Extensions Operation and Maintenance" Tab -> "Install, Update or Remove extensions" Tab. Click the "Search for Extensions" button.
Enter part of the extension name or description and press search. Select the desired extension(s) and click install. If an extension is already installed, it will not show up in the
search results.
You can also install from the shell by running the extension installer as the web server user: (Be sure to run as the webserver user, not as root!)
cd /path/to/foswiki
perl tools/extension_installer <NameOfExtension> install
If you have any problems, or if the extension isn't available in configure, then you can still install manually from the command-line. See https://foswiki.org/Support/ManuallyInstallingExtensions for more help.
- To make sure the installation was successful, run the
mailnotify script from the command line, with no parameters. In this case it will print out what it would have done to STDOUT.
Additional settings
- You can change the regular expression that matches email addresses in WebNotify using the
{MailerContrib}{EmailFilterIn} setting in configure. This allows you to limit the domains to which emails can be sent, or even block email addresses altogether.
If you plan to use the "run from the web" feature, you
must run
configure and save at least once after installing for the first time.
cron (or an equivalent off-line job scheduler), from the command-line, or from a web page.
Running from the command-line
The mailer can be invoked from the command line by the tools/mailnotify
script.
The script is used as follows:
perl -I bin mailnotify [-q] [-nonews] [-nochanges] [ web1 web2 ... webN ]
| bin |
path to the Foswiki bin directory, so that the script can find the rest of Foswiki |
-q |
Don't print progress information |
-nonews |
Skip the "news mode" (do not process subscriptions that include "!" or "?" following the topic) |
-nochanges |
Only run the news mode. (only process subscriptions that include "!" or "?" following the topic) |
-noreset |
Don't reset the timestamp after this run. The next run will repeat the same changes notified in this run |
-nomail |
Don't actually send mail, just show what would be done. Be sure to include -noreset or the timestamp will be reset even though no mail was sent. |
web1 web2 ... webN |
List of webs to process, separated by spaces or commas. The default is to process all webs. Wildcards (*) are supported. |
Be careful what user you use to run this script. It will write the
Foswiki log files, and if these log files are left in a state where they
can't be written to by the Foswiki server, you may break your site.
Setting up a cron job(s)
You need to set up a cron (or equivalent) job to run the tools/mailnotify script.
Setting up cron can be done in many ways. Below is an ultra-short overview which may be sufficient.
To avoid issues with file permissions,
install the crontab as the web server user such as nobody, =www-data or =www=.
Crontab syntax is 5 numbers followed by the command
A B C D E command to be executed
- A is minutes (0-59)
- B is hour (0-23)
- C is day of month (1-31)
- D is month (1-12)
- E day of week (0-6) (Sunday=0)
An asterix '*' means any value
If you choose to setup the cron by editing the system-wide
/etc/crontab file, the syntax is
A B C D E username command-to-be-executed
/usr/local/foswiki, this cron entry:
0 0 * * * cd /usr/local/foswiki && perl -I bin tools/mailnotify -q Public Private
will generate change notifications for the Public and Private webs every night at midnight.
0 0 * * * cd /usr/local/foswiki && perl -I bin tools/mailnotify -q -Sandbox
will generate change notifications for all webs, except the Sandbox web.
0 0 * * 0 cd /usr/local/foswiki && perl -I bin tools/mailnotify -nochanges
will generate newsletters from all webs every week on midnight Saturday but will not process the non-newsletter subscriptions.
0 0 * * * cd /usr/local/foswiki && perl -I bin tools/mailnotify -nonews
will generate change notifications for all webs every night at midnight but will not process the newsletter subscriptions.
To learn more about cron and crontab, Google for crontab.
Note: Multiple instances of the
mailnotify script are not allowed to be executed simutaneously. If you need to run the script multiple times with different options, make sure the cron jobs are scheduled so a previous run has finished before the next starts. You can also write a small script that runs
mailnotify in sequence as described in
Foswiki:Support.DuplicateNotificationsFromMailerCon.
Note: Even if you run separate
-nonews and
-nochanges cron jobs, the subscriptions using the "?" feature will only show the topics that changed since last time the
mailnotify script was run even if it was run with
-nonews. Separate newsletter jobs work best with the unconditional "!" mode.
Triggering mail notification from the browser
You can also the mailer from within the browser, using a REST handler.
For example, to notify changes in all webs, POST to %SCRIPTURL{rest}%/MailerContribPlugin/notify. The URL parameters webs, nonews, nochanges, and excludewebs correspond to the different command-line parameters.
nonews=1 |
Skip the "news mode" (do not process subscriptions that include "!" or "?" following the topic) |
nochanges=1 |
Only run the news mode. (only process subscriptions that include "!" or "?" following the topic) |
noreset=1 |
Don't reset the timestamp after this run. The next run will repeat the same changes notified in this run |
nomail=1 |
Don't actually send mail, just show what would be done. Be sure to include -noreset or the timestamp will be reset even though no mail was sent. |
webs=web1 web2 ... webN |
List of webs to process, separated by spaces or commas. The default is to process all webs. Wildcards (*) are supported. |
excludewebs=web1 web2 ... webN |
List of webs to exclude, separated by spaces or commas. The default is to process all webs. Wildcards (*) are supported. |
(Admin authority required!)
Because there is a risk that someone could lock up your server by
firing multiple notification requests at it, the REST handler is only
accessible to administrators.
The changes emails sent to subscribers are based on a Foswiki template called mailnotify. This template must contain the following definitions.
HTML:before |
Section of an HTML email before the changes |
HTML:middle |
Repeated in an HTML email for each change |
HTML:after |
Section of an HTML email after the changes |
HTML:diff |
Topic diffs in HTML format |
PLAIN:before |
Section of a plain text email before the changes |
PLAIN:middle |
Repeated in a plain text email for each changes |
PLAIN:after |
Section of a plain text email after the changes |
PLAIN:diff |
Topic diffs in plain text format |
MailNotifyBody |
All the above are embedded in this. %HTML_TEXT% expands to the HTML obtained by expanding the HTML:* templates, %PLAIN_TEXT% from the PLAIN:* templates. The definitions may contain %DIFF_TEXT%. |
The default template sends multipart emails containing both HTML and plaintext versions.
Avoid editing the distributed
mailnotify.tmpl file, or you will regret it later when it gets overwritten when you upgrade Foswiki. Instead, you should either use a skin setting to choose the template file, or use the web part of the
template search path rules.
It is recommended to use the skin method, as it is easier to control, and requires less hacking around. Especially if you need to use the same tailoring for many (or all) webs.
- Simple global tailoring used in all webs using your normal default skin
- Make a copy of
templates/mailnotify.tmpl called templates/mailnotify.skiname.tmpl. For example, templates/mailnotify.pattern.tmpl, and modify this copy to your need. If you use the NatSkin simply use templates/mailnotify.nat.tmpl instead
- Using a dummy skin name globally
- In Main.SitePreferences, define a setting
* Set SKIN = notifyskin,pattern where the notifyskin is the dummy skin name and the pattern in this example is the real skin.
- Create a
templates/mailnotify.notifyskin.tmpl with your tailorings
- Using a dummy skin name per web
- In each web where you want a special mailnotify template, add the setting
* Set SKIN = notifywebname,pattern where the notifywebname is the dummy skin name for this web and the pattern in this example is the real skin.
- For each web where you need a special mailnotify template, create a
templates/mailnotify.notifywebname.tmpl with your tailorings
- Using the web path in the templates directory
- For each web where you want a special mailnotify, create subdirectories in
templates with the same names as the webs and place a templates/mailnotify.tmpl in these subdirectories with your tailorings
Newsletters are sent after formatting using the standard view template, using whichever skin is selected in the topic being mailed.
Using a topic defined email template
If you want to use a topic to define the notify email format this is possible with a small workaround. Before you go ahead and do this you need to consider the security implication. Making the email format available to any user from a browser means that spammers can abuse this to create messages where they can spoof the from address. Only use this method if your Foswiki installation is safely behind a firewall and your users can be trusted.
The method can best be shown with an example. In the following we...
- Define a custom mailnotify template based on a skin setting in WebNotify
- Allow the users to define the email format in a topic called WebNotifyCustomTemplate
Here are the steps:
First, we create a file templates/mailnotify.customnotify.tmpl which only contains these two lines
%TMPL:INCLUDE{"mailnotify"}%
%TMPL:INCLUDE{"WebNotifyCustom"}%
In the webs where you want the topic defined email format, we add the setting * Set SKIN = customnotify,pattern
(assuming pattern is the normal skin)
And we create a topic in the web called WebNotifyCustomTemplate which contains the entire mailnotify template you want to use. Simply copy the content from templates/mailnotify.tmpl to this template and do the tailoring.
Info
Another great Foswiki extension from the 
WikiRing - working together to improve your wiki experience!
Many thanks to the following sponsors for supporting this work:
| Copyright ©: |
2004, Wind River Systems; 2009-2014 Foswiki Contributors |
| Change History: |
|
| 2.85 (8 Jan 2018) | Foswiki 2.1.5 Foswikitask:Item14554: remove link to unused wikiring.com domain.
Foswikitask:Item13350: Mailnotify appears to skip notification of some changes.
\
Foswikitask:Item14446: Unwritable work_area results in mega-spam.
Foswikitask:Item14588: mailnotify fills debug log with errors about "surprising mapping" and "missing mapping".
Foswikitask:Item14590: missing closing tag in html diff of mailnotify. |